Leader LV5381

Beschrijving

LV5381/LV5381-S – MULTI SDI MONITOR Simultaneous Monitoring up to Four SDI Signals

The LV5381 (or LV5381-S) is a waveform monitor that can monitor up to four SDI signals simultaneously. It is optimized for the level adjustment of the outputs of multiple installed cameras. In the video signal waveform display, vector display, and picture display, multiple input signals can be displayed on top of each other or lined up next to each other.

It is also full of useful features such as a level meter display for embedded audio, an error display that indicates transmission errors, and a 5-bar display that shows video signal peak levels using five bars. Furthermore, the LV5381 can show different combinations of these displays in its multi-screen display.

Additional Configuration:
LV5381-S: This is the same LV5381 waveform monitor but this configuration includes two pre-installed options, Audio Option (OP-02) and Status Option (OP-03).

MAIN FEATURES:

Simultaneous Monitoring of Four Inputs
The LV5381 is a waveform monitor with a built-in 8.4-inch TFTLCD. It can display up to four SDI input signals of the same format simultaneously. The LCD is an XGA display (1024 x 768 pixels) that boasts high color reproduction. This makes the LV5381 useful for picture monitoring as well.

Rich Assortment of Display Features
Not only does the LV5381 have essential displays for video signal quality monitoring, such as a video signal waveform display and a vector display, it also has a rich assortment of other display features such as a picture display, audio level meter display, 5-bar display, transmission error detection, and gamut error detection.

Wide Variety of Display Formats
In the video signal waveform display, vector display, and picture display, the LV5381 can display up to four input SDI signals on top of each other or side by side. This makes it suitable for adjusting the gain and black balance values of multiple cameras. In the video signal waveform and vector displays, the LV5381 can make different waveforms easier to see by using a different waveform color for each input channel.

Extremely Flexible Display Layouts
Each of the different displays can be shown on a single screen, or the multi-screen display feature can be used to divide the screen into four areas with a different display shown in each area. The video signal waveform display, picture display, and audio level meter display can be shown as a thumbnail display on the one-screen display.

Video Signal Waveform Display
The input Y CB CR signal can be converted to an RGB or pseudocomposite signal and shown on the video signal waveform display. The video signal waveform display has a rich assortment of features such as waveform magnification and line selection.

Picture Display
The picture display has a wide variety of picture monitoring features, such as color temperature specification; brightness, contrast, and aperture adjustment; and the display of gamut error locations.

Standard-Equipped CINELITE Ⅱ
The CINELITE feature makes it easy to manage the levels of specific points on the picture display. This is useful for adjusting the gain of multiple cameras through the use of the same reference point. The CINEZONE feature makes it possible to check the luminance distribution of the whole picture display at a glance.

S-LOG2 Exposure Function Capabilities (Option)
In order to manage the challenges of the S-LOG2 (exposure) feature in certain cameras, Leader has created an option for it. You can now see clearly the details that are included in a shot by turning on the Low Key function (for over-exposed images) or High Key function (for under-exposed images). In addition, now the image can be zoomed in on the instrument without affecting the focusing captured from the camera.

Screen Capture Feature
The display can be captured and stored as image data. The captured data can be displayed on the LV5381. Additionally, it can be saved as bitmap files to USB memory, which makes it possible to view the data on a PC.

External Sync Signal Input
The LV5381 can receive a tri-level sync signal or an NTSC or PAL black burst signal as its external sync signal and then display video signal waveforms with this sync signal as its reference.

Presets
Stores up to 30 front panel presets.

Key LEDs
All the panel keys have LEDs. This makes it easy to find the keys even in dark environments.

Last Memory
Equipped with a feature that stores panel settings to memory.

ID Display
IDs can be assigned to input channels. IDs are entered from the LV5381 panel.

Stereo Headphone Output
The LV5381 can deliver the embedded audio of an SDI signal in stereo through the headphone output jacks.

4-Input Monitor for HD/SD SDI

€ 6.162,00 excl. BTW

  • Gratis verzending vanaf € 350,00
  • Prijzen gelden alleen bij bestelling online
  • GarantieWij verzorgen rechtstreeks de garantie
  • ServiceEerlijk advies en persoonlijke service
  • Kom langsOnze showroom is open op werkdagen 09:00 - 17:00
  • ErvarenAl 45 jaar uw broadcast specialist

Leader LV5381

4-Input Monitor for HD/SD SDI

€ 6.162,00excl. BTW

Bereken nu uw leasebedrag
  • GarantieWij verzorgen rechtstreeks de garantie
  • ServiceEerlijk advies en persoonlijke service
  • Kom langsOnze showroom is open op werkdagen 09:00 - 17:00
  • ErvarenAl 45 jaar uw broadcast specialist

Beschrijving

LV5381/LV5381-S – MULTI SDI MONITOR Simultaneous Monitoring up to Four SDI Signals

The LV5381 (or LV5381-S) is a waveform monitor that can monitor up to four SDI signals simultaneously. It is optimized for the level adjustment of the outputs of multiple installed cameras. In the video signal waveform display, vector display, and picture display, multiple input signals can be displayed on top of each other or lined up next to each other.

It is also full of useful features such as a level meter display for embedded audio, an error display that indicates transmission errors, and a 5-bar display that shows video signal peak levels using five bars. Furthermore, the LV5381 can show different combinations of these displays in its multi-screen display.

Additional Configuration:
LV5381-S: This is the same LV5381 waveform monitor but this configuration includes two pre-installed options, Audio Option (OP-02) and Status Option (OP-03).

MAIN FEATURES:

Simultaneous Monitoring of Four Inputs
The LV5381 is a waveform monitor with a built-in 8.4-inch TFTLCD. It can display up to four SDI input signals of the same format simultaneously. The LCD is an XGA display (1024 x 768 pixels) that boasts high color reproduction. This makes the LV5381 useful for picture monitoring as well.

Rich Assortment of Display Features
Not only does the LV5381 have essential displays for video signal quality monitoring, such as a video signal waveform display and a vector display, it also has a rich assortment of other display features such as a picture display, audio level meter display, 5-bar display, transmission error detection, and gamut error detection.

Wide Variety of Display Formats
In the video signal waveform display, vector display, and picture display, the LV5381 can display up to four input SDI signals on top of each other or side by side. This makes it suitable for adjusting the gain and black balance values of multiple cameras. In the video signal waveform and vector displays, the LV5381 can make different waveforms easier to see by using a different waveform color for each input channel.

Extremely Flexible Display Layouts
Each of the different displays can be shown on a single screen, or the multi-screen display feature can be used to divide the screen into four areas with a different display shown in each area. The video signal waveform display, picture display, and audio level meter display can be shown as a thumbnail display on the one-screen display.

Video Signal Waveform Display
The input Y CB CR signal can be converted to an RGB or pseudocomposite signal and shown on the video signal waveform display. The video signal waveform display has a rich assortment of features such as waveform magnification and line selection.

Picture Display
The picture display has a wide variety of picture monitoring features, such as color temperature specification; brightness, contrast, and aperture adjustment; and the display of gamut error locations.

Standard-Equipped CINELITE Ⅱ
The CINELITE feature makes it easy to manage the levels of specific points on the picture display. This is useful for adjusting the gain of multiple cameras through the use of the same reference point. The CINEZONE feature makes it possible to check the luminance distribution of the whole picture display at a glance.

S-LOG2 Exposure Function Capabilities (Option)
In order to manage the challenges of the S-LOG2 (exposure) feature in certain cameras, Leader has created an option for it. You can now see clearly the details that are included in a shot by turning on the Low Key function (for over-exposed images) or High Key function (for under-exposed images). In addition, now the image can be zoomed in on the instrument without affecting the focusing captured from the camera.

Screen Capture Feature
The display can be captured and stored as image data. The captured data can be displayed on the LV5381. Additionally, it can be saved as bitmap files to USB memory, which makes it possible to view the data on a PC.

External Sync Signal Input
The LV5381 can receive a tri-level sync signal or an NTSC or PAL black burst signal as its external sync signal and then display video signal waveforms with this sync signal as its reference.

Presets
Stores up to 30 front panel presets.

Key LEDs
All the panel keys have LEDs. This makes it easy to find the keys even in dark environments.

Last Memory
Equipped with a feature that stores panel settings to memory.

ID Display
IDs can be assigned to input channels. IDs are entered from the LV5381 panel.

Stereo Headphone Output
The LV5381 can deliver the embedded audio of an SDI signal in stereo through the headphone output jacks.

Door het gebruiken van onze website, ga je akkoord met het gebruik van cookies om onze website te verbeteren. Dit bericht verbergen Meer over cookies »