Ikegami Full Digital HDTV Portable Camera System

Beschrijving

The HC-HD300 is equipped with a 1/3 inch bayonet lens mount and employs three 1/3-inch CMOS progressive-scan sensors, each with 2.2 million pixels, in RGB prism formation. It delivers high quality pictures in all commonly used HD video formats: 1920 x 1080/59.94i, 1920 x 1080/50i, 1280 x 720/59.94p, 1280 x 720/50p and 720 x 480/59.94i (NTSC), 720 x 576/50i (PAL).

Typical performance characteristics of the HC-HD300 in 1080/59.94i output mode are 1,000 television lines horizontal resolution, 58 dB signal-to-noise ratio and 2,000 lux sensitivity (89.9 per cent white reflection) at F10 aperture. Equivalent aperture in 1080/50i mode for this light level is F11.

Camera gain be attenuated from mid level to -3 or -6 dB, or increased by +3, +6, +9, +12 or + 18 dB. Integral neutral density filters (100 per cent, 25 per cent, 6.2 per cent and 1.6 per cent) can be switched in as required, plus operator-selectable 3,200, 4,300, 6,300 and 8,000 kelvin electronic colour conversion. An electric shutter can be set to 1/100, 1/120, 1/250, 1/500, 1/1,000 or 1/2,000 second speed.

The HC-HD300 weighs 4.5 kg including FA-300 fibre adapter and measures 139 x 270 x 337 mm (width x depth x height). Operating voltage range is 11 to 16 volts and power consumption (excluding FA-300) is 19 watts. The camera is designed for use within an ambient temperature range of -20 to +45 Celsius and 30 per cent to 90 per cent non-condensing operating humidity.

Available options include the newly-developed FA-300 fibre adaptor and BSF-300 base station. The HC-HD300’s output cable is fitted with a Neutrik opticalCon Duo connector to provide efficient protection against dust. Up to 250 metres of cable can be connected direct to the camera, extendable to 10 kilometres by using external power.

 

Supporting features of the HC-HD300 include the focus assist and lens aberration correction functions employed in Ikegami’s established UnicamHD range of cameras.

Artikelcode: 7677364
  • HC-HD300 Multi Format Camera Head
  • FA-300 Fiber Adaptor (Neutrik CN)
  • Fujinon X17sx 4.5 BRM-K3 HD lens T-791 Tripod Mount Plate
  • BSF-300 HDTV Fiber Base Station
  • OCP-10 Operation Control Panel

€ 22.640,00

€ 10.000,00 excl. BTW

  • Levertijd van ca. 1 week
  • Gratis verzending vanaf € 350,00
  • Prijzen gelden alleen bij bestelling online
  • GarantieWij verzorgen rechtstreeks de garantie
  • ServiceEerlijk advies en persoonlijke service
  • Kom langsOnze showroom is open op werkdagen 09:00 - 17:00
  • ErvarenAl 45 jaar uw broadcast specialist

Ikegami Full Digital HDTV Portable Camera System

  • HC-HD300 Multi Format Camera Head
  • FA-300 Fiber Adaptor (Neutrik CN)
  • Fujinon X17sx 4.5 BRM-K3 HD lens T-791 Tripod Mount Plate
  • BSF-300 HDTV Fiber Base Station
  • OCP-10 Operation Control Panel

€ 22.640,00

€ 10.000,00excl. BTW

Bereken nu uw leasebedrag
  • GarantieWij verzorgen rechtstreeks de garantie
  • ServiceEerlijk advies en persoonlijke service
  • Kom langsOnze showroom is open op werkdagen 09:00 - 17:00
  • ErvarenAl 45 jaar uw broadcast specialist

Beschrijving

The HC-HD300 is equipped with a 1/3 inch bayonet lens mount and employs three 1/3-inch CMOS progressive-scan sensors, each with 2.2 million pixels, in RGB prism formation. It delivers high quality pictures in all commonly used HD video formats: 1920 x 1080/59.94i, 1920 x 1080/50i, 1280 x 720/59.94p, 1280 x 720/50p and 720 x 480/59.94i (NTSC), 720 x 576/50i (PAL).

Typical performance characteristics of the HC-HD300 in 1080/59.94i output mode are 1,000 television lines horizontal resolution, 58 dB signal-to-noise ratio and 2,000 lux sensitivity (89.9 per cent white reflection) at F10 aperture. Equivalent aperture in 1080/50i mode for this light level is F11.

Camera gain be attenuated from mid level to -3 or -6 dB, or increased by +3, +6, +9, +12 or + 18 dB. Integral neutral density filters (100 per cent, 25 per cent, 6.2 per cent and 1.6 per cent) can be switched in as required, plus operator-selectable 3,200, 4,300, 6,300 and 8,000 kelvin electronic colour conversion. An electric shutter can be set to 1/100, 1/120, 1/250, 1/500, 1/1,000 or 1/2,000 second speed.

The HC-HD300 weighs 4.5 kg including FA-300 fibre adapter and measures 139 x 270 x 337 mm (width x depth x height). Operating voltage range is 11 to 16 volts and power consumption (excluding FA-300) is 19 watts. The camera is designed for use within an ambient temperature range of -20 to +45 Celsius and 30 per cent to 90 per cent non-condensing operating humidity.

Available options include the newly-developed FA-300 fibre adaptor and BSF-300 base station. The HC-HD300’s output cable is fitted with a Neutrik opticalCon Duo connector to provide efficient protection against dust. Up to 250 metres of cable can be connected direct to the camera, extendable to 10 kilometres by using external power.

 

Supporting features of the HC-HD300 include the focus assist and lens aberration correction functions employed in Ikegami’s established UnicamHD range of cameras.

Door het gebruiken van onze website, ga je akkoord met het gebruik van cookies om onze website te verbeteren. Dit bericht verbergen Meer over cookies »